Andre Dinuth
アンドレ ディヌス
For Andre, the guitar is a means of expressing his emotions. As a guitarist, Andre has recorded and performed in concert with many well-known Indonesian musicians such as Glenn Fredly, Sandhy Sondoro, Rio Febrian, Andi Rianto, Erwin Gutawa, Afgan, Rossa, Marcell, Trio Lestari, BCL, Tulus, and Yura. He has been involved in recordings and concerts of renowned Indonesian musicians such as Andi Rianto, Erwin Gutawa, Rossa, Marcell, Trio Lestari, BCL, Tulus and Yura. Outside of Indonesia, he has worked with Siti Nurhaliza, Sheila Madjid, Anwar Zain, Hafiz Zain, Hafiz, Jacklyn Victor, Hafiz, Fazura, and others from Singapore and Malaysia.
Aside from supporting other artists and doing studio work, he also works as the Andre Dinuth Group, of which he is the frontman. on June 25, 2014, he released his first self-titled album, ANDRE DINUTH, and in 2016, his second album, “Here With You“ was released. In 2019 he released the new single ”AEONIAN”, and he’s working on his third album.
He also teaches in the guitar department of the Indonesian Music School and travels throughout Indonesia for guitar clinics.
-Andre Dinuth-
S-S-H layout × Coil tap switch
Based on the “TAC24” model of the same series, the S-S-H pickup arrangement follows the specifications of Andre’s favorite “T-STANDARD A.D. CUSTOM”. A mini-switch mounted between the volume and tone knobs allows coil-tapping of the bridge position humbucker.
Custom pickups
That use Alnico 5 magnets
At Andre’s request, a high-output pickup set of pickups using Alnico 5 magnets was used for this model. It outputs a clear and powerful sound from crunch tone to high gain.
Flame mahogany and Okume body
The body top is made of beautifully grained flame mahogany. The color lineup includes blue burst, which is a reproduction of Andre’s favorite custom model, and cherry sunburst.
In order to get close to the sound Andre wanted, the body is made of okume wood, which is close to mahogany and has a characteristic midrange.
Heel-less cut for better playability of the higher frets
To ensure good playability of higher frets, a heel-less cut has been made at the joint. The shape is also carefully designed so that it fits the hand and does not cause any discomfort when playing those frets.
Roasted Maple Neck
The neck is made of roasted maple, a new staple of Bacchus models. Roasted Maple goes through a high heat treatment process, volatilizing the water and oils in the wood, giving as a result a more sturdy and durable wood that not only increases stability but also the overall sound quality of the material.
※Each unit might have a sligthly different color to its neck due to the natural variatian that arises from the raosting process.
400R fretboard x Jumbo frets
A 400R fretboard is used, suitable for technical playing. Jumbo frets, which are taller and wider than those used on the regular Universe series, are used for the frets. They are easy to press and have an extended sustain.
2-point tremolo unit &
Locking machine heads
This model features the same two-point tremolo unit as the regular “TAC24” model. By using the two studs on the left and right sides as fulcrums, the resistance of the moving parts during arming is much less, resulting in smoother arming and more stable tuning.
Signature on the back of the headstock
The back of the headstock features Adnre’s signature, showing at a glance that it is his signature model.